Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:hpc:software:kytkin [2019/12/11 11:17]
hsuikkan [Input files]
en:hpc:software:kytkin [2019/12/11 11:57] (current)
hsuikkan [Input files]
Line 18: Line 18:
   * SLURM refers to running the calculation in an HPC environment with the SLURM job management system.   * SLURM refers to running the calculation in an HPC environment with the SLURM job management system.
  
-<file kytkin.input>+<code>
 # Name of coupled calculation case. Your Serpent and TRANSURANUS input files need to have this same name followed by the file type description. Example input files: # Name of coupled calculation case. Your Serpent and TRANSURANUS input files need to have this same name followed by the file type description. Example input files:
 # Serpent input file: casename.sss # Serpent input file: casename.sss
Line 109: Line 109:
 m2 1-10 3 3 4 5 6 8 m2 1-10 3 3 4 5 6 8
  
-# Must be set after m1b, m1h and m2 +# Cold radial coordinates for fuel and cladding [cm]. 
-# Cold radii [cm] +# Must be set after m1b, m1h and m2. 
-# First coordinate R1:+# First coordinate:
 # 0 when fuel is without central hole # 0 when fuel is without central hole
 # >0 when fuel is with central hole # >0 when fuel is with central hole
-# coldrads <PIN> <FMIN> <FMAX> <CMIN> <CMAX> +# coldrads <PINLIST> <FMIN> <FMAX> <CMIN> <CMAX> 
-coldrads 1,5 0.0 0.41175 0.42085 0.4819 +# Example for identical rods:
-coldrads 8 0.0 0.41175 0.4208 0.4818 +
-coldrads 21 0.0 0.4116 0.4208 0.48255 +
-coldrads 24 0.0 0.41165 0.42095 0.4825+
  
-# Fast flux energy interval [MeV] +coldrads 1-10 0.0 0.412 0.421 0.480
-# ffluxdet <PINUNI> <EMIN> <EMAX> <RMIN> <RMAX> +
-# Fast flux energy interval [MeV] +
-# Cold radii [cm] +
-ffluxdet 1,5 1 20 0.42085 0.4819 +
-ffluxdet 8 1 20 0.4208 0.4818 +
-ffluxdet 21 1 20 0.4208 0.48255 +
-ffluxdet 24 1 20 0.42095 0.4825+
  
-Linear power value [kW/m], #2 +Fast flux tallies for cladding. Energy interval in MeV and radii in cm. 
-starting_linear_power <PINUNI> <P+ffluxdet <PINLIST> <EMIN> <EMAX> <RMIN> <RMAX
-starting_linear_power 1,5,8,21,24 0.0+# Example for energy interval 1-20 MeV tallied in the cladding: 
 +ffluxdet 1-10 20 0.421 0.480
  
-# Linear power profile#ax2 +# Initial value for linear power [kW/m] in pins.  
-# starting_linear_power_profile <PINUNI> <PZMIN> <PZ1> <PZ2> <PZ...> <PZMAX> +# Replaces tag #2 in the TRANSURANUS input template. 
-starting_linear_power_profile 1,5,8,21,24 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0+# Example for zero linear power in all pins: 
 + 
 +starting_linear_power 1-10 0.0 
 + 
 +# Linear power profile (form factors for axial sections). 
 +# Replaces tag #ax2 in the TRANSURANUS input template. 
 +# starting_linear_power_profile <PINLIST> <PZMIN> <PZ1> <PZ2> <PZ...> <PZMAX> 
 +# Example for identical values in each of the 6 axial sections of all pins. 
 + 
 +starting_linear_power_profile 1-10 1.0 1.0 1.0 1.0 1.0 1.0 
  
 # Flux value [1/(cm^2 s)], #3 # Flux value [1/(cm^2 s)], #3
Line 228: Line 228:
 dtstep 0.48 dtstep 0.48
  
-</file>+</code>
  
 === Serpent input file === === Serpent input file ===
  
 === TRANSURANUS input file === === TRANSURANUS input file ===
 
/opt/webdata/webroot/wiki/data/pages/en/hpc/software/kytkin.txt · Last modified: 2019/12/11 11:57 by hsuikkan
[unknown button type]
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 3.0 Unported
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki